Bath radiator Sahara exchange 500x1200 mm white straight with side connection
- High quality bathroom radiator
- Mounting material included
- Quality from ECD Germany
- Classic design
- Top processing
- Versatile
- 3 years warranty
Scope of delivery:
Vent valve 1/2 inch
Dummy plug 1/2 inch
Assembly instruction
Wall mounting set:
- 4 x wall brackets
- 4 x screws and dowels
- 4 x bracket screw
- 4 x washers
Vent valve 1/2 inch
Dummy plug 1/2 inch
Assembly instruction
Wall mounting set:
- 4 x wall brackets
- 4 x screws and dowels
- 4 x bracket screw
- 4 x washers
Technical information:
Maximum operating pressure: 10 bar (1 MPa)
Test pressure: 12 bar (1.2 MPa)
Wattage: 599W
Vertical D-profiles 40 x 30 x 1,5 mm
Horizontal round tubes 22,5 x 1,2 mm
Distance to the wall: approx. 6,5cm
High-quality bathroom radiator from the specialist dealer
Long service life thanks to 2-layer coating
The lower side connection is approx. 4 cm away from the lower edge
The radiator can be connected by turning it right or left
Radiator blasted with recyclable material, degreased, iron-phosphated and electrostatically coated with epoxy-polyester in white - RAL 9016 / anthracite.
The radiator is specially designed to replace steel and tubular radiators and heating panels.
It can be installed in the bathroom and kitchen directly to the existing connections quickly, easily and without structural changes
Thick base material
Immediately available from stock
Robust cardboard packaging
Maximum operating pressure: 10 bar (1 MPa)
Test pressure: 12 bar (1.2 MPa)
Wattage: 599W
Vertical D-profiles 40 x 30 x 1,5 mm
Horizontal round tubes 22,5 x 1,2 mm
Distance to the wall: approx. 6,5cm
High-quality bathroom radiator from the specialist dealer
Long service life thanks to 2-layer coating
The lower side connection is approx. 4 cm away from the lower edge
The radiator can be connected by turning it right or left
Radiator blasted with recyclable material, degreased, iron-phosphated and electrostatically coated with epoxy-polyester in white - RAL 9016 / anthracite.
The radiator is specially designed to replace steel and tubular radiators and heating panels.
It can be installed in the bathroom and kitchen directly to the existing connections quickly, easily and without structural changes
Thick base material
Immediately available from stock
Robust cardboard packaging
Technische Informationen
- Maximaler Betriebsdruck: 10 bar (1 MPa)
- Prüfdruck: 12 bar (1,2 MPa)
- Vertikale D-Profile 40 x 30 x 1,5 mm
- Horizontale Rundrohre 22,5 x 1,2 mm
- Abstand zur Wand: ca. 6,5cm
- Hochwertiger Badheizkörper vom Fachhändler
- Lange Lebensdauer dank 2-Schicht-Lackierung
- Der untere Seiten-Anschluss ist ca. 4 cm von der Unterkante weg
- Der Heizkörper kann durch drehen rechts oder links angeschlossen werden
- Heizkörper mit recycelbarem Material gestrahlt, entfettet, eisenphosphatiert und elektrostatisch mit Epoxid-Polyester beschichtet in weiß - RAL 9016 / Anthrazit.
- Der Heizkörper wurde speziell als Ersatz für Stahl- und Röhrenradiatoren und für Heizplatten konzipiert
- Er kann in Bad und Küche direkt an die vorhandenen Anschlüsse schnell, einfach und ohne bauliche Veränderungen montiert werden
- Dickes Grundmaterial
- Sofort ab Lager lieferbar
- Robuste Kartonverpackung
Befestigungsset für Badheizkörper
Real ratings
