Sahara bathroom radiator with 900W heating element, 300x1400 mm, anthracite, straight, with side connection
- Electric bathroom radiator
- Mounting material included
- Quality from ECD Germany
- Top processing
- 3 years warranty
Scope of delivery:
Bathroom heater
Vent valve 1/2 inch
dummy plug 1/2 inch
Assembly instruction
Wall mounting set:
4 x wall brackets
4 x screws and dowels
4 x bracket screw
4 x washers
Heating rod
Bathroom heater
Vent valve 1/2 inch
dummy plug 1/2 inch
Assembly instruction
Wall mounting set:
4 x wall brackets
4 x screws and dowels
4 x bracket screw
4 x washers
Heating rod
Technical information:
Width (mm): 300
Height (mm): 1400
Connections (mm): 255
Pipe diameter: Ø22
Profile: 30*40*1.5 D
Heating element power: 1200W
Water capacity (L): 4.34
Weight (kg): 6.63
Colour: anthracite
For pipe diameters 18 to 22 mm;
for pipe spacing 18 to 22 mm;
Depth (wall to centre of pipe): 75 to 100 mm;
Deep wall plugs are not suitable for installation in plasterboard walls.
Maximum operating pressure: 10 bar (1 MPa)
Test pressure: 12 bar (1.2 MPa)
Vertical D-profiles 30 x 40 x 1.5 mm
Horizontal round tubes 22 x 1.2 mm
Distance from wall: approx. 6.5 cm
Technical information: heating element
Heating power: 900 W 230 V / 50 Hz
Temperature: 10 °C – 65 °C ± 2 °C
Connection cable: 1.5 m / 3 x 0.75
Colour: white
Connection size: 1/2"
Weight: 410 (g)
Total length: 450 (mm)
Heating element length L: 370 (mm)
Type: RD 10
This electronic temperature controller enables precise temperature control of the heater (adjustable temperature from at least 10 °C to prevent water from freezing in the system).
The heating element is fitted with a thermal fuse; the power supply is cut off if the temperature is exceeded.
Width (mm): 300
Height (mm): 1400
Connections (mm): 255
Pipe diameter: Ø22
Profile: 30*40*1.5 D
Heating element power: 1200W
Water capacity (L): 4.34
Weight (kg): 6.63
Colour: anthracite
For pipe diameters 18 to 22 mm;
for pipe spacing 18 to 22 mm;
Depth (wall to centre of pipe): 75 to 100 mm;
Deep wall plugs are not suitable for installation in plasterboard walls.
Maximum operating pressure: 10 bar (1 MPa)
Test pressure: 12 bar (1.2 MPa)
Vertical D-profiles 30 x 40 x 1.5 mm
Horizontal round tubes 22 x 1.2 mm
Distance from wall: approx. 6.5 cm
Technical information: heating element
Heating power: 900 W 230 V / 50 Hz
Temperature: 10 °C – 65 °C ± 2 °C
Connection cable: 1.5 m / 3 x 0.75
Colour: white
Connection size: 1/2"
Weight: 410 (g)
Total length: 450 (mm)
Heating element length L: 370 (mm)
Type: RD 10
This electronic temperature controller enables precise temperature control of the heater (adjustable temperature from at least 10 °C to prevent water from freezing in the system).
The heating element is fitted with a thermal fuse; the power supply is cut off if the temperature is exceeded.
Real ratings
