Rohrschneider + Rohrbiegezange + Bördelgerät
- CRIMPS: For normal 45 °, double e-flanging and open F-flanges
- PIPE BENDING MACHINE SUITABLE FOR: Pipe diameters: 6 - 8 - 10 mm (1/4 "(6.3 mm) - 5/16" (7.9 mm) - 3/8 "(9.5 mm))
- MINI PIPE CUTTER: For pipe diameter of 3-22mm
- DELIVERY: 1 x Crimping tool, 1 x Clamping jaws, 7 x Pressure pieces 4.75, 5, 6, 8.10 mm, 1/4 "+ 1/2", Comes in a practical plastic case, 1 x Pipe bending pliers 1 x Mini tube cutter
- ALSO APPLICABLE IN: The automotive sector, cutting brake / fuel lines, etc
Description Mini pipe cuuter for pipe diameter from 3-22mm (1/8inch-7/8inch)
Mini tube cutter with high-quality, tempered steel cutting wheel and double rollers. Corrosion resistant paintwork. For use in confined spaces, since only minimal rotation around the pipe is required. For cutting copper, brass and aluminum pipes.
This tool is especially suitable for brake line systems. With the aid of this tool, you can use the brake line systems simply and without much effort.
First, apply it only with light pressure and increase the pressure after the first rotation with the setting wheel.
Keep in mind that the cut is clean and straight, that is, the groove that is formed will meet its own beginning again.
If the pressure drops after a few turns, increase it again and repeat the process until the pipe is cut off.
Do not increase the contact pressure too much. This can damage the cutting wheel. The tubes should be cut through and not pushed through.
Advantages:
Technical details:
Wingspan: 3mm - 22mm ((1/8inch-7/8inch))
Design: completely made of metal - no plastic parts
Replaceable cutting wheel
Grip, knurled adjusting wheel
Dimensions approx. 4,3 x 3,5 cm
Ideally also applicable in the automotive sector, cutting brake / fuel lines, etc.
Mini tube cutter with high-quality, tempered steel cutting wheel and double rollers. Corrosion resistant paintwork. For use in confined spaces, since only minimal rotation around the pipe is required. For cutting copper, brass and aluminum pipes.
This tool is especially suitable for brake line systems. With the aid of this tool, you can use the brake line systems simply and without much effort.
First, apply it only with light pressure and increase the pressure after the first rotation with the setting wheel.
Keep in mind that the cut is clean and straight, that is, the groove that is formed will meet its own beginning again.
If the pressure drops after a few turns, increase it again and repeat the process until the pipe is cut off.
Do not increase the contact pressure too much. This can damage the cutting wheel. The tubes should be cut through and not pushed through.
Advantages:
- Cutting range: 3 - 22 mm, suitable for copper, brass, aluminum and thin-walled steel pipes
- Handy design with very small working radius
- Effortless pressure regulation by large knurled knob
- Ergonomic design of the body and button with support surfaces for the hand during the rotary movement
- Two support rollers with puncture for bead cutting
Technical details:
Wingspan: 3mm - 22mm ((1/8inch-7/8inch))
Design: completely made of metal - no plastic parts
Replaceable cutting wheel
Grip, knurled adjusting wheel
Dimensions approx. 4,3 x 3,5 cm
Ideally also applicable in the automotive sector, cutting brake / fuel lines, etc.
Real ratings
