LED strip set 5 m RGB - 30 LED per meter incl. power supply and big remote control
- Bright efficient LED Strip
- Dual simple control + 20 colors and 6 modes
- Easy to install and detachable
- Wide range of applications
- Durable
- 3 years warranty
Scope of delivery:
1 x 5 m RGB LED Strip
1 x 2A power supply
1 x controller
1 x remote control with 44 buttons
1 x 5 m RGB LED Strip
1 x 2A power supply
1 x controller
1 x remote control with 44 buttons
Technical Information:
LED Strip Technical Information:
the length of the RGB strip is 5 meters in total
30 extra bright 5050 SMD per meter
Energy efficiency class: A
Not waterproof protection factor IP20
every third SMD can be shortened
the width of the strip is approx. 10mm / only 2mm flat and self-adhesive
including power supply for connection to 230V
connection via 12 Volt DC (you can find a corresponding power supply in our shop)
hardly any heat development during operation (approx. 25-30°C)
very high light intensity (12lm per LED = 360lm total)
high durability
color: RGB(multicolored)
operating temperature: -20 to +60°C
LEDs used: Type 5050 SMD
Cut off after every 3 SMDs (10cm)
Technical information of the remote control with 44 buttons:
20 colors
6 mix buttons for own color storage
6 color change programs
Auto: Automatically cycles through the other 5 programs
Flash: The color white flashes and can be set to a strobe with the Quick button
Jump3: The colors red, green and blue flash alternately
Jump7: 7 colours flash alternately
Fade3: The colors red, green and blue become light and dark alternately
Fade7: Soft color gradient with many different colors
Dimensions remote control: 125mm x 56mm x 7mm ( L x W x H )
Technical information of the power supply:
Output current: 2A
Input voltage: AC 100 - 240V 50/60Hz
Output voltage: DC 12V
Output power: 24W
Connector: 5.5/2.1mm positive pole inside
Protection: short circuit protection, overheat protection, overvoltage protection
Adapter dimension: approx. 80 x 40 x 30mm
LED Strip Technical Information:
the length of the RGB strip is 5 meters in total
30 extra bright 5050 SMD per meter
Energy efficiency class: A
Not waterproof protection factor IP20
every third SMD can be shortened
the width of the strip is approx. 10mm / only 2mm flat and self-adhesive
including power supply for connection to 230V
connection via 12 Volt DC (you can find a corresponding power supply in our shop)
hardly any heat development during operation (approx. 25-30°C)
very high light intensity (12lm per LED = 360lm total)
high durability
color: RGB(multicolored)
operating temperature: -20 to +60°C
LEDs used: Type 5050 SMD
Cut off after every 3 SMDs (10cm)
Technical information of the remote control with 44 buttons:
20 colors
6 mix buttons for own color storage
6 color change programs
Auto: Automatically cycles through the other 5 programs
Flash: The color white flashes and can be set to a strobe with the Quick button
Jump3: The colors red, green and blue flash alternately
Jump7: 7 colours flash alternately
Fade3: The colors red, green and blue become light and dark alternately
Fade7: Soft color gradient with many different colors
Dimensions remote control: 125mm x 56mm x 7mm ( L x W x H )
Technical information of the power supply:
Output current: 2A
Input voltage: AC 100 - 240V 50/60Hz
Output voltage: DC 12V
Output power: 24W
Connector: 5.5/2.1mm positive pole inside
Protection: short circuit protection, overheat protection, overvoltage protection
Adapter dimension: approx. 80 x 40 x 30mm
Technical information:
- Total length of 500cm RGB Strip
- 30 extra-bright SMD per meter
- Can be shortened for any third SMD
- Width of the strips approximately 10mm / 2mm flat and only self-adhesive
- Power consumption 5-6W / m
- Includes power supply for connection to 230V
- Connection via 12 volt DC (An appropriate power supply is available in our shop)
- Almost no heat generation during operation (25-30 ° C)
- Very high light intensity (5lm 750lm per LED = total)
- Of course with RoHs compliant and CE Mark
- Long service life
- IP21, suitable for wet locations e.g. Bathrooms, garages, basements
- Total length of 500cm RGB Strip
- 30 extra-bright SMD per meter
- Can be shortened for any third SMD
- Width of the strips approximately 10mm / 2mm flat and only self-adhesive
- Power consumption 5-6W / m
- Includes power supply for connection to 230V
- Connection via 12 volt DC (An appropriate power supply is available in our shop)
- Almost no heat generation during operation (25-30 ° C)
- Very high light intensity (5lm 750lm per LED = total)
- Of course with RoHs compliant and CE Mark
- Long service life
- IP21, suitable for wet locations e.g. Bathrooms, garages, basements
Real ratings